Roland ep-90/70 - Manual (Page 21)

21
Try Recording Your Performance
You can use the following methods to save the recorded performance on the external devices.
- Connect an audio device to the ep-90/70, and record your performance on a cassette tape or
other media (p. 24).
- Connect a MIDI sequencer, and record the performance on the sequencer (p. 25).
Listening to the Recorded Performance
Listen to the performance you recorded.
1.
Press the [Play] button to make the indicator light.
The performance you recorded will play back. When the recorded performance ends, the
[Play] button indicator will go dark, and playback will stop.
fig.6-08.e
2.
If you wish to stop playback during the performance, press the
[Play] button to make the indicator go dark.
fig.6-07.e
If the metronome is sounding while the performance plays back, the playback will begin after a
two-measure count.
Deleting Recorded Songs
You can delete recorded songs in their entirety.
1.
While pressing the [Play] button, also press the [Rec] button.
This deletes the recorded song.
fig.6-10.e
MEMO
Play Play
Press Lit
Play Play
Press Dark
MEMO
Play Rec
While holding down... Press