Radio Shack Digital Answering System with Caller ID Deluxe and 2.4 GHz Digital Spread Spectrum Cordless Phone - Manual (Page 28)

28 Answering System Operation
3. To use a remote command, press # and
(within 2 seconds) the number for the
command you want.
Note: The remote operation stops when
someone picks up the handset or any phone
on the same phone line.
Press #
then
To
1 Repeat current message dur-
ing playback.
2 Play messages.
3 Skip current message during
playback.
4 Delete current message dur-
ing playback.
5 Stop playback, recording, and
room monitoring.
6 Set the answering system to
answer calls.
7 Record or stop recording a
memo.
8 Record or stop recording a
new outgoing message.
9 Set the answering system to
not answer calls.
∗∗∗∗ Monitor the room where the
answering system is located
for 15 seconds.