Storing your area code – Radio Shack Digital Answering System with Caller ID Deluxe and 2.4 GHz Digital Spread Spectrum Cordless Phone User Manual
Page 15
15
Installation
Follow these steps to turn the Caller ID/Call
Waiting feature on or off.
1. Lift the handset and press
FUNC
.
2. Press
2
or
VOL/CID
9
9
9
9
to select
9?:9M
9?:9M
9?:9M
9?:9M
(Caller ID/Call Waiting).
3. Press
SELECT/CH
to change the Caller
ID/Call Waiting setting.
Ed
Ed
Ed
Ed
,
EEEE\\
\\\\
\\
, or
Efj
Efj
Efj
Efj
appears.
4. Press
FUNC
or return the handset to the
base to store the new setting.
Note:
Efj
Efj
Efj
Efj
lets you use advanced Caller ID/
Call Waiting options (see “Call Waiting Op-
tions Service” on Page 20).
STORING YOUR AREA
CODE
You can store your local area code in the
phone’s Caller ID record so it does not show
(or dial) the area code if the received call is
from your local area. If you need to dial the
area code (or store it in memory), you can
add it afterwards. See “Adding/Deleting the
Area Code” on Page 22.
Note: If your calling area requires 10-digit di-
aling including area code, do not enter the
area code but leave this option blank.
Follow these steps to store your area code.
1. Lift the handset and press
FUNC
.
2. Press
3
or
VOL/CID
9
9
9
9
twice to select
7h[W
7h[W
7h[W
7h[W
9eZ[
9eZ[
9eZ[
9eZ[
.
3. Press
SELECT/CH
, then enter your
three-digit area code. If you make a mis-
take, repeatedly press
∗∗∗∗
/
TONE
/
6
6
6
6
or
####
/
7
7
7
7
to move the cursor over the incorrect
digit, then enter the correct number.
4. Press
SELECT/CH
to store the area
code, then press
FUNC
or return the
handset to the base to clear the display.
Note: If an area code is already stored,
it appears on the display. To delete the
area code, press
SELECT/CH
,
press
DEL
three times, then enter your area code.
Or, you can use
∗∗∗∗
/
TONE
/
6
6
6
6
or
####
/
7
7
7
7
to
move the cursor and edit the area code.