beautypg.com

Memory dialing, Storing a name and number in memory – Radio Shack Digital Answering System with Caller ID Deluxe and 2.4 GHz Digital Spread Spectrum Cordless Phone User Manual

Page 18

background image

18

Telephone Operation

VOL/CID

8

8

8

8

or

9

9

9

9

on the handset also

controls the connected headset’s vol-
ume.

• If you place the handset on the base to

recharge it while the headset is con-
nected, be sure the handset seats prop-
erly.

With a headset connected, you make or an-
swer calls as usual using the keys on the
handset.

You can use a handset holder (available
from your local RadioShack store) to hang
the handset on your belt for greater conve-
nience.

When you finish using the headset, discon-
nect it from the handset and close the rubber
cover to protect the jack.

MEMORY DIALING

You can store up to 20 phone numbers and
names in memory, then dial a stored number
by entering its memory location number.

Each stored number can be up to 20 digits,
and each name can be up to 13 characters.

Storing a Name and Number in
Memory

Notes:

• When you are storing a number in mem-

ory, an error tone sounds and the phone
exits the storing process if you wait
more than 20 seconds between each
keypress.

• If you receive a call during memory

entry, the phone exits the storing pro-
cess.

Follow these steps to store a name and num-
ber in memory.

1. Lift the handset.

2. Hold down

MEM

until

C[ceho

C[ceho

C[ceho

C[ceho

ijeh[

ijeh[

ijeh[

ijeh[

and a

list of memory location numbers appear.

3. Press the appropriate numbers (

01–20

)

to choose the desired two-digit memory
location. Precede a single digit location
number with a

0

, such as

01

,

02

, or

03

.

4. Press

SELECT/CH

.

Ijeh[

Ijeh[

Ijeh[

Ijeh[

DWc[

DWc[

DWc[

DWc[

appears.

If you do not want to enter a name, skip
to Step 6.

5. To enter a name, use the number keys.

Refer to the letters on the number keys
to select the desired letter. Press the key
once for the first letter in upper case,
press twice for the second letter in upper
case, and so on. To enter a lower case
letter, press the key four times (or five
times) to display the first letter in lower
case, five times (or six times) for the
seconds lower case letter, and so on.

For example, to enter the name John:
press

5

once; upper case

@@@@

appears.

Then press

6

six times; lower case

eeee

appears. Press

4

five times; lower case

^^^^

appears. Press

6

five times; lower

case

dddd

appears.

To enter two letters from the same key in
a row, press

####

/

7

7

7

7

to move the cursor to

the next position.

For example, to enter AB, press

2

;

7777

appears. Then press

####

/

7

7

7

7

, the cursor

moves to the next position, then press

2

twice so

8888

appears.

To enter a space, press

####

/

7

7

7

7

twice with-

out entering any character.

To enter a number, repeatedly press the
corresponding number key until the
number appears.