Radio Shack ET-598 - Manual (Page 9)

9
2. Plug the supplied AC adapter’s
barrel plug into the DC IN 9V jack.
3. Route the adapter cord through
both the upper and lower grooves
and the modular cord(s) through
only the upper groove on the bot-
tom of the base.
Note: If you are using two modu-
lar cords, route both through the
appropriate grooves.
Upper
Grooves
Lower
Groove
4. Plug the adapter into a standard
AC outlet. The POWER indicator
on the base lights.
5. Plug the other end(s) of the modu-
lar cord(s) into the wall plate jack
(and wall jack, if appropriate), then
align the base’s keyhole slots with
the wall plate studs and slide the
base downward to secure it.
6. Press and lift out the handset
holder, rotate it 180°, then snap it
back into place so it holds the
handset.
43-698a.fm Page 9 Friday, August 13, 1999 12:56 PM