RCA VR706HF - Manual (Page 29)

Chapter 3 27
Using the Remote Control
Numbers (0 through 9) Select a channel up to 99 by pressing two numbers. Select a
cable channel over 99 by pressing and holding 1 until 1 – – appears on the screen.
Then press the other two numbers.
PAUSE Pauses playback or recording. Press PAUSE again to return to playback or
recording.
PLAY Plays a tape.
RECORD Starts VCR recording. Also used for Express recording.
REVERSE Rewinds the tape when the VCR is stopped. Searches backward through a
tape during playback. Starts slow motion during play-pause and decreases slow-
motion speed.
SEARCH Displays INDEX and GO-TO Search menus on screen when the VCR is
stopped. Advances the tape forward through 30 seconds of recorded material during
playback. Each press advances the tape an additional 30 seconds (up to five minutes).
This button also displays the MOVIE ADVANCE screen for prerecorded movies and
starts COMMERCIAL ADVANCE skipping during playback.
SPEED Selects a recording speed (SP or SLP).
STOP Stops the current VCR function such as record, playback, rewind, or fast
forward.
TRACKING Up or Down Lets you manually reduce the streaks that may appear on
the picture during play, slow motion, or pause. Reduces picture “jitter” during stop-
action playback.
TV•VCR Switches the picture signal so that it either comes from the VCR or cable/
antenna system.
TV Function Buttons
CHAN Up or Down Selects next higher or lower channel in the TV’s channel memory.
CLEAR Removes menus or status displays from the screen.
GO BACK Switches between two channels. Select one channel and then select
another using the number buttons. Press GO BACK to switch between the two
channels.
INFO Shows the TV’s status displays on the TV screen.
INPUT Selects between the TV’s input channel or tuner. Press to see the VCR signal if
you connected your VCR using the
AUDIO/VIDEO jacks.
MUTE Reduces volume to minimum level.
Numbers (0 through 9) Select a channel up to 99 by pressing two numbers. Select a
cable channel over 99 by pressing and holding 1 until 1 – – appears on the screen.
Then press the other two numbers.
ON•OFF Turns a compatible TV off and on.
VOL Up and Down Raises and lowers sound of TV.