Ricoh Aficio MP 161L - Manual (Page 32)

User Tools ( System Settings )
26
3
❖ System Auto Reset Timer
The System Reset setting automatically switches the screen to that of the func-
tion set in Function Priority when no operations are in progress, or when an
interrupted job is cleared. This setting determines the system reset interval.
See p.23 “Function Priority”.
Note
❒ Default: On, 60 sec.
❒ The time can be set from 10 to 999 seconds in 1 second increments, using
the number keys.
❒ When the set time has passed, the control panel returns to the menu that
was displayed before the {User Tools/Counter} key was pressed.
❖ Copier Auto Reset Timer
Specify the time to elapse before copier modes reset.
Note
❒ If [Off] is selected, the machine does not automatically switch to the user
code entry screen.
❒ Default: On, 60 sec.
❒ The time can be set from 10 to 999 seconds, using the number keys.
Key Operator Code
The key operator must set the following items. For settings or more information,
contact the key operator.
It is recommended that the key operator program a key operator code when per-
forming the settings. See p.27 “Key Operator Code”.
❖ User Code Man.:Copier
Allows you to control who uses the machine by setting codes for users.
User codes must be registered for user code management.
Note
❒ Default: Off
❒ By using [Auto Program] for the printer, you can keep a print log for each
user code entered from the driver.
❖ Key Counter Management
Use the key counter to specify whether users are restricted or not.
Note
❒ Default: Off
StellaC3L_GSG_F-AE_FM_forPaper.book Page 26 Monday, September 11, 2006 4:00 PM