Rhino Mounts SE42 - Manual (Page 85)

OPERATION
SE42 03/08 Operation Section 4-3
© 2008 Alamo Group Inc.
OPERA
T
ION
1. Standard Equipment and Specifications
Horsepower Required (Min.) 15 HP
Cutting Capacity (Max.) 1”
Cutting Height 1-1/2” Min.
Safety Deflector Std.
Cutting Width 42”
Transport Width 45-1/4”
Overall Length 76-1/2”
Weight (Approx.) 305 lbs.
Hitch CAT I
Blade Carrier Pan
Gearbox Rating:
540 RPM 30 HP
Output Shaft Diameter 1-9/16”
Blade Tip Speed:
540 RPM 11,459 FPM
Driveline Size Cat 3
Deck Thickness 11 Ga.
Side Skirt 11 Ga. x 6”
*Ratings based on actual field performance.
The Mower is designed for certain mowing applications and is rated to cut up to a specific
size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this
mower to cut vegetation above the Mower’s rated capacity or to cut any type of non-
vegetative material. Only operate this Mower on a properly sized and equipped Tractor. Operating this Mower
in an application for which it is not designed and/or operating the Mower with the wrong size Tractor can cause
Mower component damage and equipment failure resulting in possible serious injury or death.
(SGM-14)