Introduction – Rhino Mounts SE42 User Manual

Page 77

INTRODUCTION

SE42 03/08

Introduction Section 2-3

INTRODUCTION

Your RHINO SE42 mower is designed for light-duty cutting such as pasture mowing, weed, and grass control.

With a reasonable amount of preventive maintenance, your Mower will provide years of dependable service.

For Non-Agricultural use, OSHA, ASAE, SAE, and ANSI standards require the use of Chain

Guards or Solid Skirts at all times. The Cutter manufacturer strongly recommends the use of

Chain Guards or Solid Skirts for Agricultural purposes as well, to reduce the risk of property

damage, serious bodily injury, or even death from objects thrown out by or from contact with

the Cutting Blades.

At least 20% or the tractor’s weight must be on the front tires with the implement lifted to

provide adequate traction for safe steering under good conditions. Slow down on hills, rough

terrain, and curves.

Front and rear, and left and right are determined by the normal direction of travel (the same as on your

automobile).