RCA 21015 - Manual (Page 47)

47
Unit beeps
• Place the handset in the cradle for 30 seconds. If it still beeps, charge
battery for 16 hours.
• Clean charging contacts on cordless handset and charger with a soft
cloth or an eraser.
• See solutions for “No dial tone”.
• Replace the battery.
Charge indicator on the base flashes
• Provided your phone company offers voice message service and you
subscribe to it, the charge indicator on the base flashes when the phone
is not in use to indicate there is a message waiting. It stops flashing
after the message has been reviewed.
Memory Dialing doesn't work
• Did you program the memory location keys correctly?
• Did you follow proper dialing sequence?
Unit locks up and no communication between the base and cordless
handset
• Unplug the AC power supply from the wall outlet and the back of the
base. Remove the handset battery. Wait for 30 seconds and plug the
power adapter back into the base and wall outlet. Reconnect the battery
and charge for 16 hours. Re-register the handset.
C
ALLER
ID S
OLUTIONS
No Display
• Charge or replace the battery.
• Make sure that the unit is connected to a non-switched electrical outlet.
Disconnect the AC power supply from the base and reconnect it.