RCA 21015 - Manual (Page 37)

37
1. Use the or
button on the handset or the base to scroll to the desired
CID record.
2. Press the mem button.
3. Press the desired memory location button. Example: press the number
01 key to store the record in memory location 1. If the memory location
is occupied and, you want to replace it, you must confirm the
replacement by pressing the mem button.
NOTE: Press EXIT button once to keep previous the setting and return to the
Caller ID menu. Or, press and hold the EXIT button on handset to return to
standby mode.
D
IALING A
CID N
UMBER
While reviewing CID records, you may call the caller phone number
showing in the display.
1. Make sure the phone is OFF (not in talk mode).
2. Press or
button on the handset or the base until the desired call
record is displayed. Depending on (a) how the incoming phone number
was formatted when it was received, and (b) whether or not you
previously pre-programmed your local area code into memory, you may
need to adjust the format of the incoming caller’s stored phone number
PETER CHAN
317 - 123 - 4567
01 CALL # 9:58 AM 11/24 NEW
01-50
SELECT MEMORY
-- #
MEMO
REPLACE MEMO?
765-4321
01 #
MEMO