Ryobi RY09051 - Manual (Page 5)

3 - English
GENERAL SAFETY RULES
WARNING:
READ AND UNDERSTAND ALL INSTRUCTIONS. Fail-
ure to follow all instructions listed below may result in
electric shock, fire and/or serious personal injury.
READ ALL INSTRUCTIONS
 Do not allow children or untrained individuals to use this
unit.
 Never start or run the engine inside a closed area;
breathing exhaust fumes can kill.
 Wear eye protection with side shields which is marked
to comply with ANSI Z87.1 along with hearing protection
when operating this product.
 Keep all bystanders, children, and pets at least 50 ft.
away.
 Wear heavy long pants, long sleeves, boots, and gloves.
Do not wear loose fitting clothing, short pants, sandals,
jewelry of any kind, or go barefoot.
 To reduce the risk of injury associated with objects being
drawn into rotating parts, do not wear loose clothing,
scarves, neck chains, etc.
 Secure long hair so it is above shoulder level to prevent
entanglement in any rotating parts.
 Do not operate this unit when you are tired, ill, or under
the influence of alcohol, drugs, or medication.
 Do not operate in poor lighting.
 Keep all parts of your body away from any moving parts
and all hot surfaces of the unit.
 Wear a face filter mask in dusty conditions to reduce the
risk of injury associated with the inhalation of dust.
 Check the work area before each use. Remove all objects
such as rocks, broken glass, nails, wire, or string which
can be thrown or become entangled in the machine.
 Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance or exposure
to hot surfaces.
 Never operate the unit without a spark arrestor screen;
this screen is located inside the muffler.
 Product users on United States Forest Service land,
and in some states, must comply with fire prevention
regulations. This product is equipped with a spark
arrestor; however, other user requirements may apply.
Check with the federal, state, or local authorities in your
area.
 Before storing, allow the engine to cool.
 Empty fuel tank into a container approved for gasoline
and restrain the unit from moving before transporting in
a vehicle.
 To reduce the risk of fire and burn injury, handle fuel with
care. It is highly flammable.
 Do not smoke while handling fuel.
 Mix and store fuel in a container approved for gasoline.
 Mix fuel outdoors where there are no sparks or flames.
 Select bare ground, stop engine, and allow to cool before
refueling.
 Loosen fuel cap slowly to release pressure and to keep
fuel from escaping around the cap.
 Tighten the fuel cap securely after refueling.
 Wipe spilled fuel from the unit. Move 30 ft. away from
refueling site before starting engine.
 Never attempt to burn off spilled fuel under any
circumstances.
 Use only identical manufacturer’s replacement parts and
accessories. Use of any other parts may create a hazard
or cause product damage.
 Maintain the unit per maintenance instructions in this
Operator’s Manual.
 Inspect the unit before each use for loose fasteners, fuel
leaks, etc. Replace damaged parts.
 Do not use on a ladder, rooftop, tree, or other unstable
support. Stable footing on a solid surface enables better
control of the blower in unexpected situations.
 Before cleaning, repairing, or inspecting, shut off the
engine and make certain all moving parts have stopped.
Disconnect the spark plug wire, and keep the wire away
from the plug to prevent starting.
 Service on the blower/vacuum must be performed by
qualified repair personnel only. Service or maintenance
performed by unqualified personnel could result in injury
to the user or damage to the product.