Rockford Fosgate 360.6 User Manual

Page 9

8. Input Sensitivity Controls – The input level controls are preset

to match the output of most source units. They can be adjusted
to match output levels from a variety of source units.

Bass EQ Control – The Bass EQ allows a narrow band adjustment
of up to +18dB centered at 45Hz. The bass boost can be
bypassed by turning the control to its minimum or counterclock-
wise position. The Bass EQ is dedicated for “Channel C” only.

10. Internal Crossovers – These built-in crossover cards are

configurable for a multitude of operating frequencies. The
orientation of the card in its socket determines the function of
high-pass, low-pass, or full range operation.

11. Channel C Phase Switch – This switch enables you to easily

invert the phase of “Channel C” (0

/180

) without having to

disconnect the speaker wires.

12. LED Power Indicator – The LED illuminates when the unit is

turned on.

– 6 –

*Please refer to Owner's

Manual for signal input

switch configurations.

Phase

Switch

*Signal

Input

Switches

–180

Ch. C
XCard

Ch. A
XCards

XCard C

XCard B

XCard A

Ch. B
Dual Filter
XCards

XCard C

XCard B

XCard A

–180