Radio Shack 43-3545 User Manual

Page 27

Operation

DEL

to delete a character. To

delete all characters, hold down

CH/DEL

for at least 1 second.

6. Press

SEL

Ijeh[

DkcX[h

appears.

7. Enter the number and any tone

and pause entries (see “Using
Tone Services on a Pulse Line” on
Page 23 and “Entering a Pause”).

8. Press

SEL

. The phone beeps and

C[ceho

dddd

Ijeh[Z

appears (

dddd

number). After a few seconds,

C[ceho

Ijeh[

appears, and you

can repeat Steps 3–8 to store
more numbers.

To replace a stored number, simply
store a new one in its place.

'PVGTKPI"C"2CWUG

In some telephone systems, you must
dial an access code (9, for example)
and wait for a second dial tone before
you can dial an outside number. You
can store the access code with the
phone number; however, you should
also store a pause after the access
code to allow the outside line time to
connect.

"016'"

Each tone or pause
entry uses one digit of
memory.