Radio Shack 43-3545 - Manual (Page 12)

12
Installation
2. Plug one end of the supplied long
modular cord into the TEL LINE
jack on the back of the base.
3. Insert the supplied AC adapter’s
barrel plug into the DC IN 9V jack
on the bottom of the phone’s base.
4. Route the adapter and modular
cords through the grooves on the
back of the base.
5. Align the base’s keyhole slots with
the mounting screws and slide the
base downward to secure it.
6. Plug the modular cord’s other end
into the phone jack, and plug the
adapter into a standard AC outlet.
% 100'%6+0) 1% *#4)+0) "
6*' "$ #66'4; "2 #%-
The phone comes with a rechargeable
nickel-cadmium battery pack in the
handset, but not connected. Before
using your phone, you must connect
the battery pack, then charge it for
about 15–20 hours.
#
Be sure the battery pack is properly
connected before you try to charge it.
The CHARGE/IN USE indicator lights
# "+/2146#06" #
The EPA
certified
RBRC
®
Battery
Recycling
Seal on
the nickel-cadmium (Ni-
Cd) battery indicates
RadioShack is volun-
tarily participating in an
industry program to
collect and recycle these
batteries at the end of
their useful life, when
taken out of service in
the United States or
Canada. The RBRC
program provides a
convenient alternative to
placing used Ni-Cd
batteries into the trash or
the municipal waste
stream, which may be
illegal in your area.
Please call 1-800-THE-
SHACK (1-800-843-
7422) for information on
Ni-Cd battery recycling
and disposal bans/
restrictions in your area.
RadioShack’s
involvement in this
program is part of the
company’s commitment
to preserving our
environment and
conserving our natural
resources.