Radio Shack TAD-725 - Manual (Page 20)

20
To connect the headset, open the rub-
ber cover marked
on the side of the
handset, then insert the headset’s plug
into the jack.
Notes:
• Connecting a headset disconnects
the handset’s ear piece and micro-
phone.
• VOLUME on the handset also con-
trols the connected headset’s vol-
ume.
• If you place the handset on the base
to recharge it while the headset is
connected, be sure the handset
seats properly.
With a headset connected, you make or
answer calls as usual using the keys on
the handset. You can also answer calls
by pressing the
SPEAKER button located
on the base.
You can use a handset holder (available
from your local RadioShack store) to
hang the handset on your belt for great-
er convenience.
When you finish using the headset, dis-
connect it from the handset and close
the rubber cover to protect the jack.
43-725.fm Page 20 Tuesday, February 23, 1999 2:47 PM