RCA DRC8005N - Manual (Page 33)

Graphics contained within this publication are for representation only. 31
Chapter 4: Playing Discs
Search Options
Picture Scan
To search a disc during playback, use the FORWARD or REVERSE button. Each time you
press FORWARD or REVERSE, your DVD Recorder scans the disc faster until you reach
the fastest scan speed.To resume normal playback, press PLAY.
Note: Many DVD titles are programmed to prohibit skipping of warnings or credits so that you can’t
fast forward through them.
Freeze Frame and Frame Advance
While a disc is playing, press PAUSE to freeze the picture.To advance one frame at a time,
press PAUSE again (the on-screen icon changes from PAUSE to FRAME). Each time you
press the FORWARD or REVERSE button, the picture goes to the next (or previous)
frame.To resume normal playback, press PLAY.
Slow Motion (in Freeze Frame Mode) – DVD discs only
While a disc is playing, press PAUSE. Press REVERSE or FORWARD (each time you press
REVERSE or FORWARD the slow motion will get even slower until you reach slowest
speed).To resume normal playback, press PLAY.
Time Search – DVD and VCD discs only
Make sure the Time Display (top left side of the Info Display) is highlighted, and then use
the number buttons to enter a specific time on the disc that is playing. Go to page 33 for
more information about the Time Display.
Quick Fast Forward and Quick Reverse – DVD and Audio CD only
While you’re playing a disc, press the AGAIN button on the remote (the disc automatically
repeats the last 10 seconds of the movie).
Similarly, press the ADVANCE button to go forward approximately 30 seconds.
Playback options
Many of your DVD Recorder’s playback features are accessed through the Info Display
(described on pages 32 through 36). Additionally, with some discs you can use the Zoom
Feature to see details of an image.
Zoom
1. While you’re playing a disc, press ZOOM (the player zooms in on the image). Each
time you press ZOOM, the picture is magnified even more (until you get to the
maximum zoom level).
2. To see other parts of the picture when you’ve zoomed in on the image, press the up,
down, left, and/or right arrow buttons to go in corresponding directions.
ON • OFF
MUTE
RETURN
GO• BA CK
INPUT ANTENNA
12 3
4 5 6
78
0
9
VOL CH
SAT• CABLE TV
DVD
MENU CLEAR
INFO
ANGLE
TIMER• GUIDE
OPEN• CLOSE
ZOOM
REVERSE PLAY FORWARD
PAUSE STOP RECORD
AGAIN ADVANCE LIVE
ZOOM
button
PAUSE button
FORWARD
button REVERSE
button
AGAIN
button
Using Different Menus
Each disc is programmed with different features.There are three separate types of menus
that you can use to access features:
• The Disc menu – The Disc menu is part of each disc and is separate from the DVD
Recorder’s menu.The contents of each Disc menu vary according to how the disc
was authored and what features are included.
To make the Disc menu appear, press the MENU button while the disc is playing.
• The DVD Recorder’s Info Display – The Info Display appears as icons across the
top of the screen when a disc is playing. It can only be accessed while you are playing
a disc. It’s turned on and off with the INFO button on the remote.The Info Display
icons change based on the type of disc you’re playing. Go to page 32 for more
information.
• The DVD Recorder menu – If you’re playing a disc, press STOP (the DVD
Recorder’s menu appears automatically).
Remember: A feature will only work if the disc was programmed with that feature. For example, if you
choose subtitles on the Info Display, the subtitles will only appear if the disc was created with subtitles.
If a menu or icon is “grayed out” it means that item (or feature) isn’t available.
To watch TV, press OK.
Disc
Disc Library
Timers
Watch TV
Setup
Live - Ch 2
No Disc
1 Library Disc(s)
10:49 am Thu 17-Mar 2003
DRC8005N_part2.13004 2/2/04 6:32 PM Page 31