Radio Shack ET-687 - Manual (Page 22)

22
USING A HEADSET
You can talk with hands-free conve-
nience using an optional headset that
has a
3 /
32
-inch (2.5-mm) plug. Contact
your local RadioShack store for a suit-
able headset.
To connect the headset, open the rub-
ber cover marked
on the side of the
handset, then insert the headset’s plug
into the jack.
With a headset connected, you can
make or answer calls as usual using the
speakerphone or the keys on the hand-
set.
You can use a handset holder (available
at your local RadioShack store) to hang
the handset on your belt for greater con-
venience.
When you finish using the headset, dis-
connect it from the handset and close
the rubber cover to protect the jack.
Notes:
• Connecting a headset disconnects
the handset’s earpiece and micro-
phone, but it does not affect the ET-
687’s speakerphone.
• VOL s or t on the handset also con-
trols the connected headset’s vol-
ume.
• If you place the handset on the base
face down to recharge it while the
headset is connected, be sure the
handset seats properly.
43-687.fm Page 22 Friday, August 13, 1999 11:12 AM