Ricoh GX100 VF - Manual (Page 37)

If
yo
u
are u
s
in
g
th
e
ca
mera
fo
r th
e
fi
rst ti
me
, r
e
ad
th
is
secti
o
n
.
35
1
Press the !"#$ buttons to
set the year, month, date and
time.
• Change the value with !" and
move the frame with #$.
2
In [FORMAT], choose the
date and time format.
• Select the date and time format
with !".
3
Check the information on
the screen and then press
the MENU/OK button.
• The date is set.
• Pressing the DISP. button on this screen allows you to cancel
the setting.
Note ---------------------------------------------------------------------------------------------------
•
If the battery is removed for more than one week, the date and time settings will be
lost. These settings must be made again.
•
To retain the date and time settings, load a battery with adequate remaining power
for more than two hours.
•
The set date and time can be changed later. (GP.161)
•
The date and time can be inserted into images. (GP.99)
Setting the Date and Time
When the power is turned on for the first time, the date/time
setting screen appears.
Setting at shipping