Ricoh GX100 VF - Manual (Page 204)

202
7
A
pp
e
ndi
c
e
s
Caution------------------------------------------------------------------------------------------
•
You cannot use the internal flash when an external flash is attached as this can cause
injury or damage.
•
Irrespective of flash setting, a flash ON signal is output to the X contact of the hot shoe.
To stop an external flash, use a switch on the flash.
•
Exposure may not be appropriate even when the F-value and ISO sensitivity of the
external flash are the same as those of the camera. If so, change the f-number and
ISO sensitivity of the flash.
•
As the flash ON signal, the camera outputs a positive pulse to the X contact.
•
A flash on the market rarely have an X contact of the opposite polarity. This kind of
flash may not only not work but also cause a problem to the camera. For the terminal
specifications, contact the manufacturer of the external flash.
•
Use an external flash of a lighting angle covering the angle of view of the shooting
lens.
•
Use an external flash basically at a distance where the internal flash is not adequate
(long distance). Shooting at a short distance may end in over-exposure.
•
Do not use an external flash having a special signal pin. Using such a flash may cause
inappropriate exposure or damage of the camera circuit.
•
You cannot use an LCD viewfinder when an external flash is attached.