Ricoh Aficio MP C2000 - Manual (Page 60)

Copying
38
2
When copying onto OHP Transparencies or Thin Paper
When copying onto OHP transparencies or thin paper, select the type and size
of paper.
Important
❒ We recommend that you use specified OHP transparencies.
❒ OHP transparencies must be loaded face down in the tray with the notched
corner of the sheet in the appropriate corner of the tray.
❒ To prevent multiple sheets from being fed at once, fan paper before placing it
on the tray.
❒ When copying onto OHP transparencies, remove copied sheets one by one.
A
Open the bypass tray, and then align the paper guide to the paper size.
B
Insert the paper face down until you hear the beep.
C
Press the {q} key.
D
Select paper type ([OHP (Transparency)] or [Thin Paper]) in the special paper
settings.
E
Select the paper size, and then press [OK] to return to the initial display.
F
Place the paper, and then press the {Start} key.
G
When the copy job is finished, press the {Clear Modes} key to clear the set-
tings.
Note
❒ For OHP transparencies or thin paper, print speed is slower when com-
pared to printing on plain paper.