Ricoh Aficio MP C2000 - Manual (Page 134)

Copying
112
2
To program the user stamp
This function scans an image that is used as a user stamp.
The range of stamp images for readability is 10–297 mm (0.4”-11.7”) high and
10–432 mm (0.4”-17.0”) wide. However, if the value exceeds the maximum value
of the area (5,000 mm
2 , 7.75 inch 2 ), it is corrected within the range of the area au-
tomatically.
A
Make sure that the machine is in copier mode.
B
Press the {User Tools/Counter} key.
C
Press [Copier / Document Server Features].
D
Press [Stamp].
E
Press [User Stamp].
F
Press [Program / Delete Stamp].
G
Press [mProgram], and then press the stamp number you want to program.
H
Enter the user stamp name (up to ten characters) with the letter keys, and
then press [OK].
I
Enter the horizontal size of the stamp with the number keys, and then press
{q} key.
J
Press [Vertical], and then enter the vertical size of the stamp with the number
keys, and then press {q} key.
AMG041S