RODE Microphones M3 - Manual (Page 15)

- 15 -
Care and Maintenance
1. Like all electret condenser microphones, the
M3 should be kept dry at all times. The capsule
will be potentially subject to moisture during
vocal use, and we strongly recommend the use
of the foam windscreen (supplied with your M3)
during all vocal applications. This screen will also
minimise plosives (the high sound pressure levels
of pronounced B’s and P’s which can bottom-out
the capsule).
2. Although the M3 is a well-built, durable
microphone it is subject to damage. You should be
careful not to drop or knock it as this could cause
internal damage to the electrical components.
After use, the M3 should be wiped clean with
a soft cloth, and stored in its protective case
together with its accessories.
A pack of moisture absorbent crystals (silica gel/
desiccant) is provided with your mic, and should be
stored in the case with the mic. These crystals should
be blue and if they have turned pink they are no
longer active. To restore them, place the pack in an
oven set between 100-150 O C until they return to their
original colour.
Note: There are no user serviceable parts inside
this microphone so there will never be a reason for
you to dismantle it (except to replace the battery).
Any service which may require dismantling must be
performed by an authorised Service Agent.