RODE Microphones M3 - Manual (Page 12)

- 12 -
Mounting the M3
A stand mount clip (RM3) is included with your M3 and
should be used to connect the M3 fi rmly and safely to
a stable microphone stand.
How to attach the stand mount
1. Before placing the M3 into the RM3 stand mount,
remove all cables and connectors to eliminate the
possibility of damaging the connectors.
2. Place the M3 into the RM3 by inserting the mic on
an angle (fi gures 8 & 9).
Figure 8 - Microphone mounting
Figure 9 - Microphone mounting
You will notice the holder is quite fi rm. This is intended
to stop the mic from coming loose. Ensure you leave
the On/Off Filter switch facing upwards to enable
better access while in its mount.