RODE Microphones VideoMic - Manual

80Hz
VideoMic TM
Parts Guide
Mic Controls
quickstart
guide
VideoMic TM
www.rodemic.com
1. Foam windshield
2. Camera shoe mount
3. Battery cover
4. PAD switch (inside battery compartment)
warranty.rodemic.com/videomic
Scan the QR code to
register now, or visit
Don’t FORGET
to register for your
FREE ten year warranty!
The RØDE VideoMic TM features an integrated
shock mount based on Rycote ® Lyre ® technology.
Constructed from a single piece of hard-wearing
thermoplastic, the Lyre ® provides superior acoustic
suspension to traditional elastic solutions,
and will never wear out, sag or snap.
RØDE SOUNDBOOTH
now for Broadcast mics
Hear and compare RØDE microphones
at www.rodemic.com/soundbooth or on your iPad ®
5. LED power indicator
6. Power and HPF switch
7. Integrated Rycote
® Lyre ® suspension
8. 3.5mm dual mono output cable
The High Pass Filter (HPF ) is a low frequency cut-off setting, which you can use
to remove rumble, camera noise or other low frequency noise while recording.
Mic ON
using High Pass Filter
Mic ON
Flat setting
Battery OFF
Mic mute
6
7
8
LED power
indicator
028_952_1_Videomic_Quickstart.indd 1 028_952_1_Videomic_Quickstart.indd 1 17/12/2012 8:45:19 AM 17/12/2012 8:45:19 AM