RCA 24F502TDV - Manual (Page 43)

43
Preparation / Status display of disc
NOTE:
If the TV/VCR/DVD does not operate
properly: Static electricity, etc., may
affect the player's operation. Disconnect
the AC power cord once, then connect it
again.
Preparation
Before DVD/CD operation, please make preparations as follows.
1
Insert the AC cord plug into a standard 120V 60Hz polarized
AC outlet.
• If the AC cord plug is plugged in for the first time, wait for
about 5 seconds before pressing POWER.
NOTE: When connecting to other equipment, unplug the TV/
VCR/DVD from the AC outlet.
2
Press POWER on the TV/VCR/DVD or on the remote control
to turn on the TV/VCR/DVD. The Power indicator will light.
• Every time you press POWER, the TV/DVD starts from TV
mode.
• When using an amplifier, switch on the amplifier.
3
Press DVD to select DVD mode.
The DVD startup screen will
appear on the screen.
The following pages describe the
setup/operation in DVD mode.
No Disc
00:03:13 01:30:32
1/1
00:03:13 01:30:32 1/2
1/1 Eng 1/2 Fra D
1/2 C T
DVD
Audio CD
Status display of disc
Press DISPLAY/CALL. The status display of the disc will appear
on the screen in order like the figure below.
• When you play a CD disc, the status display will appear and
remain on the screen.
34:56 71:33
11/99
T
Disc operation
Track number
Track total time
Track elapsed playing time
Play status
Subtitle language
Chapter No
Type of audio
Camera angle
Title number
Title elapsed playing time
Display Off
Audio language
Title total time
5V40101C [E] P42-45 15`03`06, 11:01 43