Auto clock setting – RCA 24F502TDV User Manual
Page 16
16
The Auto clock function will automati-
cally set the built-in clock (Month, Day,
Year and Time) when the TV/VCR/DVD
is connected to an Antenna or Cable
TV system and it is turned off. As the
TV/VCR/DVD searches for a receivable
station in your area and it receives a
broadcast signal for Auto clock, the
Auto clock needs several minutes to
set itself.
Auto clock setting
1
Connect the Antenna or Cable system.
• If you use a cable box, turn it on.
2
Plug the AC Power cord to the AC outlet.
3
Make sure the TV/VCR/DVD is turned off.
• If you press POWER, Auto clock set is not effective.
4
Wait at least three minutes and press POWER.
• Depending on the reception condition, it may take approx.
30 minutes.
5
Press DISPLAY/CALL to check the clock on the screen.
6
If the clock is not set, make sure you are receiving TV
channels. The Auto clock may not function properly if the
reception condition is not good.
Auto clock adjustment
The Auto clock adjustment will be performed at 12:00 PM everyday
if you turn off the TV/VCR/DVD.
• If you use a cable box and you want Auto clock adjustment to be
performed, the cable box must be left on.
• The Auto clock adjustment won’t work if there is more than 5
minutes between the built-in clock time and the actual time.
To set Auto clock to off
When shipped from factory “AUTO CLOCK” is set to “ON”.
But if you do not want Auto clock set (Adjustment):
1
Turn on the TV/VCR/DVD.
2
Press SETUP/TV MENU in the TV/VCR mode.
The TV/VCR menu screen will appear.
3
Press
or
to select
option.
4
Press
or
to select “AUTO
CLOCK” .
5
Press
or
to select “OFF”.
6
Press SETUP/TV MENU repeat-
edly to return to the normal
screen.
• When “AUTO CLOCK” is set
to “OFF”, the Auto clock
adjustment does not function.
• Set the clock manually (see
page 18).
Auto clock setting
CH
CLOCK SET
ON/OFF TIMER
AUTO CLOCK
ON
STANDARD TIME
DAYLIGHT
SAVING TIME
/
/
/
/ MENU
CLOCK SET
ON/OFF TIMER
AUTO CLOCK
ON
STANDARD TIME
DAYLIGHT
SAVING TIME
/
/
/
/ MENU
CH
CH
CLOCK SET
ON/OFF TIMER
AUTO CLOCK
OFF
STANDARD TIME
DAYLIGHT
SAVING TIME
/
/
/
/ MENU
NOTES:
• After a power failure or disconnection
of the power, the timer settings will be
lost. In this case, reset the present time.
• If you live in Newfoundland and the
Auto Clock does not function properly,
set the AUTO CLOCK menu option to
“OFF” and set the clock manually.
5V40101C [E] P12-17
15`03`06, 10:59
16