RCA 24F502TDV - Manual (Page 24)

24
/ / / / MENU
CH
0-9/ENTER/CANCEL/MENU
CH
V-CHIP SET
CONFIRM
PASSWORD :
CH
0-9/ENTER/CANCEL/MENU
Setting the V-Chip
To register a password
1
Press SETUP/TV MENU in the TV/VCR mode.
The TV/VCR menu screen will appear.
2
Press or to select
option, then press or to
select “PASSWORD”.
3
Select and enter a password
(4digits) using the number
buttons (0-9), then press ENTER.
• If you put a wrong number, press
CANCEL.
“ ” appears instead of the number.
4
Enter the same password again to
confirm, then press ENTER.
The password is now registered
and the V-Chip menu will appear
on the screen.
An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that
you may choose to exclude. The restriction applies to “TV RATING” and “MOVIE RATING” if this data is
transmitted. You may set this restriction separately. To use the V-Chip function, you must register a
password.
NOTES:
• To avoid forgetting the password,
write it down and keep it in a safe
place.
• If you forget the password...
1. Disconnect the AC cord plug from
the AC outlet and leave the TV/
VCR/DVD unplugged for more than
two minutes.
2. Insert the AC cord plug again, and
turn the volume level to a minimum.
3. Press the VOL button on the
front panel of the TV/VCR/DVD and
the 0 button on the remote control
for more than 2 seconds simultane-
ously.
5V40101C [E] P22-25 15`03`06, 10:59 24