RCA 24F502TDV - Manual (Page 39)

39
/ / ENTER/MENU
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– : – – – : – – – – – –
– – – – – – : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
TIMER REC SET
DATE 23(THU)
START 8:30AM
END — — : — —
CH 012
SPEED
/ / / / MENU
SP
CH
TIMER REC SET
DATE
START
END
CH
125
SPEED
/ / / / ENTER/MENU
SLP
23(THU)
7 : 00PM
9 : 30PM
CH
2 3 T H
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
7 : 0 0PM 9 : 3 0PM 1 2 5
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
/ / ENTER/CANCEL/MENU
SLP
TIMER REC SET
AUTO REPEAT
OFF
/ / / / MENU
Timer recording
Preparation:
• Press TV/VCR to select the TV/VCR mode.
• Load a cassette tape with the erase prevention tab intact.
• Press DISPLAY/CALL to verify that the time and date are correct
(see page 37).
EXAMPLE: Program a timer recording for the 23rd day, channel
125 (CABLE), 7:00 - 9:30 PM on timer program number 1 (Tape
speed: SLP).
1
Press SETUP/TV MENU. Press
or to select option.
2
Press or to select “TIMER
REC SET”, then press .
3
Press or to select one of
the program line, then press
ENTER.
4
Press or to select the date,
then press .
5
Set the start time, end time,
channel and tape speed as in
step 4, then press ENTER.
NOTES:
• Press
to move arrow
backward for correction.
• To record from external source
set the channel to “L”. “L” will
appear next to CH 125 (or 69).
6
To enter other programs, repeat
steps 3-5.
• To return to the normal screen, press SETUP/TV MENU 3 times.
7
Press TIMER REC. The T.REC indicator will light and the
VCR stands by for recording.
The timer recording will start at 5 seconds before the time you
predetermined.
NOTES:
• If the T.REC indicator does not light in spite of the pressing
of TIMER REC, the cassette may not have been loaded yet
(see page 32).
• If the cassette is ejected in spite of the pressing of TIMER
REC, the erase prevention tab of the cassette may have
been removed (see page 32).
Timer recording can be programmed
on-screen with the remote control.
The built-in timer allows automatic
unattended recording of up to 8
programs within 1 month.
NOTES:
• If the T.REC indicator blinks when the
timer recording ended, the TV program
has not been completely recorded
because of an insufficient tape supply.
Press TIMER REC to cancel the timer
program or press EJECT to remove the
cassette tape.
• During timer recording standby mode, the
VCR operation cannot be used. To use
the VCR operation, press TIMER REC to
deactivate the timer. After you use the
VCR, press TIMER REC again to put the
VCR into timer recording standby mode.
• If you press TIMER REC during timer
recording, the recording operation will
be interrupted. If you press TIMER REC
again within the programmed time, the
recording operation will start again.
• After a power failure or disconnection of
the power plug, all programmed record-
ing settings and time display will be lost
upon resumption of power. In this case,
reset the clock (see pages 16-18) and
reprogram any timer recordings.
TIMER REC SET
AUTO REPEAT OFF
CH
/ / / MENU
5V40101C [E] P36-39 15`03`06, 11:01 39