RCA Satellite TV Antenna - Manual (Page 38)

34 Final Installation
Making the Final Connections
SATELLITE IN
PHONE JACK
Step 1: Connect the RG-6 cable to the SATELLITE IN
jack on the back of the receiver.
About the Phone
Connection
The satellite receiver calls a
telephone number once a
month or so to update your
access card. It is also used
to order pay-per-view
events. These calls only
take a few seconds.
Step 2 & 3: Take the phone off the hook
before you connect a phone
cord from an outlet to the
back of the receiver.
Making the Final Connections
1. Connect the RG-6 coaxial cable to the SATELLITE IN jack at the
back of the receiver as shown. DO NOT connect the coaxial
cable to the IN FROM ANTENNA jack!
2. Take a phone off the hook to prevent electric shock from
incoming calls.
3. Connect a phone cord from the back of the receiver to a
phone jack.