RCA Satellite TV Antenna - Manual (Page 17)

Preparing for Installation 13
Metal
Reflector
Mast
LNB support arm
Retainer nut
Phillips head screw
Mounting foot
Nut, star washer,
hex head bolt
LNB
Self-locking nuts
Flat head bolts
If you have a Sony reflector, you
should have:
• Mounting foot and mast
• Satellite dish reflector
• LNB (Low Noise Block converter)
and LNB support arm
• Hardware packet
If your reflector looks like the
one on the left, you should
have:
• Mounting foot and mast
• Satellite dish reflector
• LNB (Low Noise Block
converter)
• LNB support arm
• Hardware packet
Dish Assembly Overview
Use this page both as a parts lists for your satellite antenna, and a general overview of how the
parts fit together; but DON’T ASSEMBLE THE DISH YET.
Dish Assembly Overview
Note
If you have a plastic reflector,
the bolts are molded into the
reflector; on metal reflectors,
the bolts must be inserted
through the holes on the
reflector before attaching
the reflector to the support
arm.
Reflector
Mast
LNB support arm
Mounting foot
LNB
Pre-assembled
mast clamp