Radio Shack ET-518 - Manual (Page 5)

5
INSTALLATION
SELECTING A
MOUNTING LOCATION
You can mount the base on a wall
plate or directly on a wall. Or, you can
place it on a desk, shelf, or table. Se-
lect a location that is:
• Near an AC outlet
• Near a telephone line jack
• Out of the way of normal activities
• Away from computers, remote
control toys, wireless micro-
phones, wireless intercoms,
alarms and room monitors, fluo-
rescent lights, electrical machin-
ery, electrical appliances, metal
walls, filing cabinets, and other
large metal objects
For the best reception, you should be
able to fully extend the base’s antenna
and place it in a vertical position.
The base’s location affects the phone’s
range. If you have a choice of several
locations, try each to see which one
provides the best performance.
If the phone line jack is not a modular
jack, you must update the wiring your-
self, using jacks and adapters avail-
able at your local Radio Shack store.
Or, you can let the phone company up-
date the wiring for you.
• The phone company will charge
you for the installation of the nec-
essary jacks.
• The USOC number of the jack to
be installed is RJ11C for a base-
board jack and RJ11W for a wall-
plate jack.
Placing the Base on a
Desktop
Follow these steps to place the base
on a desk, shelf, or table.
1. Plug one end of the supplied mod-
ular cord into the PHONE jack on
the back of the base.
2. Plug the modular cord’s other end
into a modular phone line jack.
3. Insert the supplied AC adapter’s
barrel plug into the 12V DC jack on
the back of the base.
43-1018.fm Page 5 Tuesday, August 17, 1999 8:53 AM