Installer – Russound UNO-S1 CAM6.6T-S1 User Manual

Page 55

INSTALLER

INSTALLATION MENU

9. SUFFIX CMD –

Tells the system whether a command will be issued after the

(Sufix)

selection of the numerical value (e.g., 1, 2

Enter). If “no,” proce-

dure advances to SAVE CHANGES (step 13)

10. COMMAND TYPE –

Select the type of source command (e.g., CD, TV, etc.).

(CmdTp)

a. Selected: Learned IR

Choose Learned IR if the pre-programmed IR code library does

(LrnIR)

not support the source component.

i. LEARNED SRC –

Select the learned source bank to be assigned to the source

(LnSrc)

component. Procedure advances to KEY FUNCTION (step 12)

b. Selected: Unassigned

The numeric IR Suffix command is cleared. Procedure advances

(Unasg)

to SOURCE NUM (step 1)

c. Selected: Default

Default selects the same device type and device code previously

(Deflt)

setup in BASIC SETUP. Procedure advances to KEY FUNCTION
(step 12)

d. Selected: Macro:

(To build macros, see Macro Editor page 61)

(Macro)

i. MACRO -

Macro loads a series of commands which are processed when

(Macro)

activated.

ii. MACRO ID –

Enter the macro ID number. Menu advances to SAVE CHANGES

(MacID)

(step 13)

e. All Other Selections:

Procedure advances to DEVICE CODE (step 11)

11. DEVICE CODE –

Source component code for IR control.

(DevCd)

12. KEY FUNCTION –

Select a function (Enter, Play, etc.).

(KeyFn)

13. SAVE CHANGES? –

Select “yes” to save the changes.

(Save?)

SRC SEL CMD (SrcSC)

This procedure permits a command to be sent to the source component when the source component
is initially selected.

See Source Select Command & # Of Sources - Flow Chart on page 69

1. SOURCE NUM –

Select the source number this command will be configured for.

(Src #)