Russound UNO-S1 CAM6.6T-S1 - Manual (Page 35)

35
12VDC Mute Trigger In
When 12VDC is applied to the Mute Trigger In,
the system will fully mute any source that is con-
nected to the Source Audio Input. The connec-
tions for the trigger are made using a two-con-
ductor cable with 1/8” male mini-plug jacks. The
tip is positive (+) and sleeve is negative (-). This
allows for the connection of an external paging
or muting device. The CAM6.6 can be pro-
grammed to mute audio for one or all zones as
preferred when the 12VDC is applied. 12VDC Mute Trigger Out
Mute Trigger Out 12VDC output is used for trig-
gering an external amplifier, muting device or
other paging component dependent on the Mute
Trigger In 12VDC. The connections for the out-
put are made using a two-conductor cable with
1/8” male mini-plug jacks at each end. The tip is
positive (+) and sleeve is negative (-). The
default setting for the Mute Trigger Out provides
12VDC whenever 12VDC is applied to the Mute
Trigger In.
INSTALLER
MAKING CONNECTIONS
12VDC Mute Trigger In/Out
CAM6.6
Doorbell Interface