Russound UNO-S1 CAM6.6T-S1 - Manual (Page 29)

29
CAM6.6
CAT-5 Cable
CAT-5 Cable
PM Mod 3D
with RJ-45
CAT-5 Cable
SA-ZX3
1201A/1A
Power
Supply
CAM6.6X
The UNO System Keypad Ports are located on
the back of the CAM6.6 in the top left of center.
Connections made at the UNO Keypad Ports are
made using CAT-5 T568A RJ-45 wire configura-
tion. CAT-5 is color-coded for ease of installa-
tion. For a clean installation when wiring from an
UNO System Keypad Port use an RJ-45 CAT-5
patch cable to connect from the keypad port to
an RJ-45 Wall Plate (optional). Using the same CAT-5 T568A RJ-45 wiring configuration, use
CAT-5 from the RJ-45 Wall Plate to the keypad.
If using more than one keypad on a zone, con-
nect a SA-ZX3 UNO System Keypad Splitter
(optional) directly to the UNO System Keypad
Port instead of going through the wall plate.
Always use the CAT-5 T568A RJ-45 wire configu-
ration when wiring any of the UNO System
Keypad Ports.
INSTALLER
MAKING CONNECTIONS
UNO-S1 Keypad Port Connection