Installer – Russound UNO-S1 CAM6.6T-S1 User Manual

Page 52

INSTALLER

INSTALLATION MENU

9. AUTO PLAY? –

“Yes” tells the CAM6.6 to issue a PLAY command whenever the

(AtoPl)

source is selected for listening. This option is skipped if the
source type (COMMAND TYPE) chosen does not have a PLAY
command associated with it.

10. SAVE CHANGES? –

Select “yes” to save changes. Procedure returns to SOURCE

(Save?)

NUM to allow configuration of another source.

KEY CONFIG (KeyCf)

Key Configuration defines zone-specific key functions for each source.

See Key Config. - Flow Chart

on page 66

1. ZONE NUM –

Select the zone the key will be configured for. Changes are made

(Zone#)

for that zone only; default setting is “All Zones.”

2. SOURCE NUM –

Select the source the key will be configured for.

(Src #)

3. SELECT A KEY –

Using

, select the keypad key to be configured.

(SelKy)

4. KEY TYPE –

Either “Key Press,” “Key Hold” or “Both” will activate the command.

(KeyTp)

5. KEY NAME –

Name that appears on the keypad display when the command is

(KeyNm)

activated.

6. COMMAND TYPE –

Select the type of source command (e.g., CD, DVD, etc.).

(CmdTp)

a. Selected: Learned IR –

Choose Learned IR if the pre-programmed IR code library does

(LrnIR)

not support the source component.

i. LEARNED SRC –

Select the learned source bank to be assigned to the source

(LnSrc)

component. Procedure advances to KEY FUNCTION (step 8)

b. Selected: Unassigned

The key configuration is cleared. Procedure advances to SAVE

(Unasg)

CHANGES (step 9)

c. Selected: Default

Default selects the same device type and device code previously

(Deflt)

setup in BASIC SETUP. Procedure advances to KEY FUNCTION
(step 8)

d. Selected: Macro:

(To build macros, see Macro Editor page 61)

(Macro)