Installer – Russound UNO-S1 CAM6.6T-S1 User Manual

Page 54

INSTALLER

INSTALLATION MENU

1. SOURCE NUM –

Select the source number this function will be configured for.

(Src #)

2. USE NUM IR? –

Tells the system whether the source component has numeric

(NumIR)

scrolling, such as 100-disc CD player. A selection of “no”
disables Numeric IR and advances to SAVE CHANGES

3. HIGHEST NUM –

Enter the highest possible number; for example, the 100-disc CD

(High#)

player would have a max number of 100.

4. NUMERIC TEXT –

Select Numeric descriptive text.

(NmTxt)

5. PREFIX CMD –

Tells the system whether a command will be issued prior to the

(Prefx)

selection of the numerical value (e.g.,

Disc 1,2). If “no,” proce-

dure advances to SUFFIX CMD (step 9)

6. COMMAND TYPE –

Select the type of command (e.g., CD, TV, etc.).

(CmdTp)

a. Selected: Learned IR

Choose Learned IR if the pre-programmed IR code library does

(LrnIR)

not support the source component.

i. LEARNED SRC –

Select the learned source bank to be assigned to the source

(LnSrc)

component. Procedure advances to KEY FUNCTION (step 8)

b. Selected: Unassigned

The numeric IR Prefix command is cleared. Procedure advances

(Unasg)

to SUFFIX CMD (step 9)

c. Selected: Default

Default selects the same device type and device code previously

(Deflt)

setup in BASIC SETUP. Procedure advances to KEY FUNCTION
(step 8)

d. Selected: Macro:

(To build macros, see Macro Editor page 61)

(Macro)

i. MACRO -

Macro loads a series of commands which are processed when

(Macro)

activated.

ii. MACRO ID –

Enter the macro ID number. Menu advances to SUFFIX CMD (step 9)

(MacID)

e. All Other Selections:

Procedure advances to DEVICE CODE (step 7)

7. DEVICE CODE –

Source component code for IR control.

(DevCd)

8. KEY FUNCTION –

Select a function (Disc, etc.).

(KeyFn)