ResMed VPAP III & III ST - Manual (Page 33)

27 How to Use the VPAP Menus
English
Servicing Menu
Table 6: Servicing Menu
* This item also appears in the Standard Menu.
Treatment Screens
After starting treatment, you can display one of the treatment screens below.
Press the Up/Down key to switch between views.
Figure 3: Treatment screen 1
Figure 4: Treatment screen 2
Figure 5: Treatment screen 3
The treatment screens contain the following information:
Treatment mode: Mode of treatment set by your clinician. Options include:
CPAP, Spontaneous, Spontaneous/Timed (VPAP III ST) and Timed
(VPAP III ST).
Function Function Description Setting Options
Serial
Number (SN) Displays the serial number for the VPAP. View only
Printed Circuit
Board (PCB) Displays the printed circuit board number. View only
Software * Displays the current software version
installed in the VPAP. View only
S:RAMP 8.0–16.6
S>>>>> exit
Treatment mode
Trigger indicator
Pressure bar graph
Set pressure(s)
}
}
Ramping indicator
LK: 24L/min RR: 12
MV: 12.0 VT:1000
Respiratory rate
Tidal volume Leak
Minute
ventilation
S ∗ ∗ C TiMx 2.0
Ti 1.5s 1:2.5
Set IPAP Max
Measured I:E ratio
Measured
inspiration time
Trigger indicator
Cycle indicator
(TiMn / C / TiMx)