Renesas H8SX/1651 - Manual (Page 18)

Section 2 Connection Procedures
Rev. 2.00 Sep. 08, 2008 Page 4 of 20
REJ10J1394-0200
Use the guide pins provided with the product to determine where to install the IC socket, as shown
in figure 2.
User system
IC socket
(NQPACK120SE-ND
manufactured by
Tokyo Eletech Corporation)
Guide pins
4 projections to apply
epoxy resin adhesive to
Bottom view of IC socket
Pin 1
Figure 2 Correctly Placing the IC Socket
2.1.2 Soldering the IC Socket
After fastening, solder the IC socket for an PLQP0120LA-A package to the user system.
CAUTION
Be sure to completely solder the leads so that the solder
gently covers the leads and forms solder fillets. (Use
slightly more solder than with the MCU.)