7 seatalkhs led indications, 7 seatalk, Led indications – Raymarine C90w User Manual
Page 65
Check that all required
equipment is connected
to the SeaTalk
hs
switch.
Check the status of the
SeaTalk
hs
Switch.
SeaTalk
hs
network
problem
Check that SeaTalk
hs
cables are free from
damage.
Instrument or other
system data is missing
from some but not all
displays.
Software mismatch
between equipment may
prevent communication.
Contact Raymarine
technical support
6.7 SeaTalk
hs
LED indications
LED indications associated with the SeaTalk
hs
switch are described
here.
LED state
Possible causes
For all connected channels: 1 steady
and 1 flashing green LED.
No problem detected (Steady LED
indicates network connection Flashing
LED indicates network traffic) .
No LEDs are illuminated.
No power to the SeaTalk
hs
switch.
Some LEDs are not illuminated.
• Cable / connection faults on the
channels with non-illuminated
LEDs.
• Equipment connected to
non-illuminated LEDs may be
faulty.
Troubleshooting
65