Radio Shack PRO-2096 - Manual (Page 64)

64
Beyond the Basics
change, and follow the steps above.
6. When stopped on an active conventional channel while
scanning, you can press MODE to cycle through the valid
modes for that channel. This resets any stored CT or DC
code to the search code, allowing you to easily check
for other CT or DC codes that may be present on the
frequency.
CTCSS, DCS, and digital voice all operate independently
of each other. If a channel is confi gured for CTCSS or
DCS, it will not be able to decode digital transmissions.
Use FM mode when mixed analog and digital voice
reception is desired.
CTCSS Code Table
67.0 Hz 94.8 Hz 131.8 Hz 171.3 Hz 203.5 Hz
69.3 Hz 97.4 Hz 136.5 Hz 173.8 Hz 206.5 Hz
71.9 Hz 100.0 Hz 141.3 Hz 177.3 Hz 210.7 Hz
74.4 Hz 103.5 Hz 146.2 Hz 179.9 Hz 218.1 Hz
77.0 Hz 107.2 Hz 151.4 Hz 183.5 Hz 225.7 Hz
79.7 Hz 110.9 Hz 156.7 Hz 186.2 Hz 229.1 Hz
82.5 Hz 114.8 Hz 159.8 Hz 189.9 Hz 233.6 Hz
85.4 Hz 118.8 Hz 162.2 Hz 192.8 Hz 241.8 Hz
88.5 Hz 123.0 Hz 165.5 Hz 196.6 Hz 250.3 Hz
91.5 Hz 127.3 Hz 167.9 Hz 199.5 Hz 254.1 Hz
DCS Code Table
6 50 125 174 255 343 445 526 703
7 51 131 205 261 346 446 532 712
15 53 132 212 263 351 452 546 723
17 54 134 214 265 356 454 565 731
21 65 141 223 266 364 455 606 732
23 71 143 225 271 365 462 612 734
25 72 145 226 274 371 464 624 743
Notes Notes