Radio Shack PRO-2096 - Manual (Page 47)

47
Beyond the Basics
radio. This operation cannot be undone.
full cloning
Do not disturb the source radio, destination radio or cable
until the transfer is complete. Interrupting the transfer
may result in corrupted data. Transferring all data will take
approximately four minutes.
1. Identify the source and destination radios. Turn both
radios on.
2. Connect the two radios using a male 1/8” to male 1/8”
cloning cable. Both radios will show the clone mode
display:
3. Press PROG on the source radio.
4. If you wish to replace the V-Scanner memory contents
in the destination radio with the V-Scanner memory
contents of the source radio, press ENT now. All eleven V-
Scanner folders will be transferred from the source radio
to the destination radio.
5. When the transfer is complete press ENT on the source
radio and remove the cloning cable. Both radios restart.
6. Repeat steps 1-3 to clone multiple radios.
selective cloning
Selective cloning allows you to choose the specifi c source
and destination folders within a local and remote radio.
This feature should be used with caution – it overwrites the
selected destination V-Scanner folder with the contents of the
selected source V-Scanner folder. This operation cannot be
undone.
1. Identify the local and remote radios. Turn both radios on.
2. On the local radio, press PROG FUNC PROG to enter V-Scanner
menu, then press SRCH.