Radio Shack PRO-2096 - Manual (Page 42)

42
Beyond the Basics
8. To load the contents of a V-Scanner folder to the
scanner’s working memory, press 2. This message
appears:
Load from
V-Scanner:
ENTER if YES
CLR to EXIT
9. Press the number key that corresponds with the V-
Scanner folder you wish to load into the scanner’s
working memory, or press CLEAR to return to the V-Scanner
menu. If you select a V-Scanner folder, the scanner will
prompt you to verify your choice. For example, if you
choose V-Scanner Folder 1, the scanner will display:
Load from
V-Scanner: 1
ENTER if YES
My V-Scanner
10. Press ENT to accept the choice, another number key to
change your selection, or CLEAR to abort and return to
the V-Scanner menu. The scanner gives you one fi nal
opportunity to abort before proceeding:
Load from
V-Scanner: 1
ENT= CONFIRM
My V-Scanner
While loading, the scanner will display:
Loading from
V-Scanner: 1
Please Wait
11. The contents of the scanner’s current working memory
will be replaced with the data from the selected
V-Scanner folder.