Radio Shack PRO-2096 - Manual (Page 18)

18
The Basics
If you make a mistake entering the frequency, Invalid Freq
briefl y appears.
When you store a frequency by pressing ENT, your
scanner beeps.
Press CLEAR to backspace and correct a character, or hold
down CLEAR for about two seconds to clear the entire fi eld
and start over.
Your scanner automatically rounds the frequency you
enter to the nearest valid frequency. For example, if you
enter 151.53, your scanner accepts it as 151.5275. Reception
of the frequency will not be adversely affected.
If you enter a frequency that is already stored, an error
tone sounds. Dupl.f and the duplicated frequency number
appear. Press CLEAR and enter another frequency.
You can replace any stored frequency by selecting the
desired bank and channel, pressing PROG, and then
entering the new frequency.
Press FUNC, and then CLEAR to erase programmed
frequency data.
deleting frequencies from channels
In certain circumstances you may wish to completely clear
the contents of a channel. One example would be to create
empty channels in a selected channel storage bank so the
frequency copy function has empty channels available for
copied frequencies. See “Copying a Frequency to a Vacant
Channel into a Specifi ed Bank”.
1. Press PROG.
2. Use the number keys or e or d to select the frequency you
want to delete.
3. Press FUNC, and then CLEAR. The frequency is cleared, and
0.00000 appears on the display.
Notes Notes