Radio Shack ET-928 - Manual (Page 16)

16
USING HOLD
To place a call on hold, press HOLD on
the handset or base. The SPEAKER in-
dicator on the base and the TALK indi-
cator on the handset (if it is off the base)
flash to remind you that the call is on
hold. You and the other party cannot
hear each other.
To take a call off hold and resume your
conversation, press
HOLD on the hand-
set or base.
Note: You can use the hanging hole on
the back of the handset to place the
handset on the wall-mounted base face-
up.
USING MUTE
The MUTE button on the base (there is
none on the handset) lets you talk to
someone else in the room without the
person on the other end of the phone
line hearing your conversation. Press
MUTE during the call. The MUTE indica-
tor on the base lights steadily.
Press MUTE again to resume your
phone conversation. The MUTE indica-
tor turns off.
USING FLASH
You can use FLASH on the handset or
base to produce a switchhook signal for
special phone services, such as Call
Waiting. If you have Call Waiting, press
FLASH to take an incoming call without
disconnecting the current call. Press
FLASH again to return to the first call.
illus of HOLD locations
on base and handset
add illus of handset
face-up on base
illus of FLASH lo-
cations on hand-
set and base
43-1098.fm Page 16 Tuesday, August 17, 1999 4:03 PM