Radio Shack ET-928 - Manual (Page 13)

13
Turning On/Off the Ringers
To have the base ring when a call
comes in, set
RINGER ON/OFF on the
back of the base to ON .
To have it not sound, set RINGER ON/
OFF to OFF .
To have the handset
ring when a call comes
in, set
RINGER ON/OFF
on the handset’s left
side to
ON .
To have it not sound, set RINGER ON/
OFF to OFF.
Note: Even if you turn off the ringer on
the handset or base, you can still make
calls using that keypad, and you can still
answer calls if you hear another phone
on that same line ring (see “Operation”
on Page 14).
Setting the Ringers’ Volume
To adjust the ringers’ volume, when the
phone is not on a call, repeatedly press
VOLUME s or t on the handset or base.
Checking/Setting the Ringer
Tone
The base and handset are both preset
to use the same ringer tone (
1 ). To
change or hear the different tones, press
FLASH then 1 , 2 , 3 , or 4 on that keypad
when the phone is not in use. (The last
number button you pressed is the tone
you will hear.)
illus -- reduce to fit
space
location of
handset’s
RINGER
ON/OFF set
to ON
add illus (2) of VOLUME
locations
illus of FLASH
43-1098.fm Page 13 Tuesday, August 17, 1999 4:03 PM