Renesas SuperH Family E10A-USB - Manual (Page 48)

40
(b) Measurement tolerance
•
The measured value includes tolerance.
•
Tolerance will be generated before or after a break.
For details, see table 2.14.
(c) Measurement items
Items are measured in the [Performance Analysis] dialog box for each channel from Ch1 to
Ch4. A maximum of four conditions can be specified at the same time. Table 2.12 shows the
measurement items. (Options in table 2.12 are parameters for of the
PERFORMANCE_SET command. They are displayed in CONDITION of the [Performance
Analysis] window.)