Renesas SuperH Family E10A-USB - Manual (Page 37)

29
AUD Trace Functions: This function is operational when the AUD pin of the device is
connected to the emulator. It is activated by selecting the [AUD trace] radio button in the [Trace
type] group box of the [Trace mode] page. Set the trace condition to be used.
Table 2.9 shows the AUD trace acquisition mode that can be set in each trace function.
Table 2.9 AUD Trace Acquisition Mode
Type Mode Description
Continuous
trace occurs Realtime trace When the next branch occurs while the trace information is
being output, all the information may not be output. The user
program can be executed in realtime, but some trace
information will be lost.
Non realtime trace When the next branch occurs while the trace information is
being output, the CPU stops operations until the information
is output. The user program is not executed in realtime.
Trace buffer
full Trace continue This function overwrites the oldest trace information to store
the latest trace information.
Trace stop After the trace buffer becomes full, the trace information is no
longer acquired. The user program is continuously executed.