Raymarine 465 - Manual (Page 73)

62 Setup Instructions
If you are using one of the dual frequency (or split) selections, some of
the fish may appear in the wide 50 kHz beam, but not in the narrower
200 kHz beam. Fish which appear in the narrow 200 kHz beam are
located more directly under the transducer, and the symbol will be solid
black. Fish which appear in the wider 50 kHz beam are less precisely
located, and the symbol will be hollow.
If you are done with your setup changes, press the CLEAR button to go
back to the normal display. To select the next menu item, press the
arrow of the Page Control Pad.
Resetting the Log
The “log” measures how far the boat has traveled through the water. The
log records the distance traveled since it was last reset. You can reset the
log at any time using the display shown in Fig. 4-7.
Distance reading
The number inside the box shows the distance reading
now being displayed by the unit. To reset the log to zero,
press either the < or the > arrows of the Page Control Pad.
If you are done with your setup changes, press the CLEAR button to go
back to the normal display. To go back to the Range Menu Item, press
the arrow of the Page Control Pad. To move on to the System Setup
Menu, press SETUP again.
Fig. 4-7
Log Reset
Menu Item