beautypg.com

Digital page, Operating instructions – Raymarine 465 User Manual

Page 57

background image

46

Operating Instructions

Digital Page

The Digital Page presents several measurements at the same time using
large, easy-to-read digital numbers. To select the Digital Page, press
either the < or > button on the Page Control Pad until the Digital Page
appears. The Digital image is useful when you are traveling, but not
looking for fish or checking the appearance of the bottom. See Fig. 3-11.

The displayed regions on the screen are:

Depth

The depth of the bottom in feet, fathoms, or meters,

depending on your selection in the System Setup Menu. If
the unit loses its “lock” on the bottom, the last known depth
will flash on and off.

Speed

The speed of your boat through the water derived from the
impeller. This is measured in MPH (statute miles per hour),
KTS (knots, or nautical miles per hour), or KPH (kilometers
per hour), depending on your selection in the System
Setup display. The speed value may also be calibrated
within the System Setup Menu. (See page 23 for details.)

Log

The distance traveled, calculated using the signal from the
paddlewheel or impeller. The 465 remembers this value
after the unit is turned off, provided the unit is shut off
using the

PWR

button. The Log may be reset to zero from

Fig. 3-11

Digital Page